Difference between revisions of "Translations:Slicer Voreinstellungen/13/en"

From 3Dator Wiki
Jump to: navigation, search
 
Line 38: Line 38:
 
|start gcode
 
|start gcode
 
|<pre>;Sliced at: {day} {date} {time}
 
|<pre>;Sliced at: {day} {date} {time}
M104 S{print_temperature} ;set temperatures
+
G21                     ;metric values
M140 S{print_bed_temperature}
+
G90                     ;absolute positioning
M109 S{print_temperature} ;wait for temperatures
+
M82                     ;set extruder to absolute mode
M190 S{print_bed_temperature}
+
M107                   ;start with the fan off
G21 ;metric values
+
G28                     ;home all axis
G90 ;absolute positioning
+
G29                     ;Auto Level
M82 ;set extruder to absolute mode
+
G1 Z0.6 F6000          ;move the Nozzle near the Bed
M107 ;start with the fan off
+
G92 E0                 ;zero the extruded length
G28 Z0  ;move Z to min endstops
+
G1 Y0                 
G28 X0 Y0  ;move X/Y to min endstops
+
G1 X10 E30 F500         ;printing a Line from right to left
G29 ;Auto Level
+
G92 E0                 ;zero the extruded length again
G1 Z0.6 F{travel_speed} ;move the Nozzle near the Bed
 
G92 E0
 
G1 Y0  ;zero the extruded length
 
G1 X10 E30 F500 ;printing a Line from right to left
 
G92 E0 ;zero the extruded length again
 
 
G1 Z2
 
G1 Z2
G1 F{travel_speed}
+
G1 F6000
M117 Printing...;Put printing message on LCD screen
+
M117 Printing...       ;Put printing message on LCD screen
M150 R255 U255 B255 P4 ;Change LED Color to white
+
M150 R255 U255 B255 P4 ;Change LED Color to white
;M408 ;enable filament sensor
+
;M408                   ;enable filament sensor
 
</pre>
 
</pre>
 
|-
 
|-
 
|end gcode
 
|end gcode
|<pre>M104 S0                     ;extruder heater off
+
|<pre>
M140 S0                     ;heated bed heater off (if you have it)
+
M104 S0                 ;extruder heater off
G91                                   ;relative positioning
+
M140 S0                 ;heated bed heater off
G1 E-1 F300                           ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+
G91                     ;relative positioning
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+
G1 E-1 F300             ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G28                         ;move X/Y to min endstops, so the head is out of the way
+
G1 Z+0.5 E-5           ;move Z up a bit and retract filament even more
M84                         ;steppers off
+
G28                     ;home all axis
G90                         ;absolute positioning
+
M84                     ;steppers off
;M409 ;disable filament sensor
+
G90                     ;absolute positioning
 +
;M409                   ;disable filament sensor
 
</pre>
 
</pre>
 
|-
 
|-
 
|}
 
|}

Latest revision as of 13:15, 15 August 2017

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Slicer Voreinstellungen)
{| class="wikitable"
!Einstellung
!Wert
|-
|Druckraum X
|180mm
|-
|Druckraum Y
|170mm
|-
|Druckraum Z
|260mm
|-
|Düsen Durchmesser
|0.5 mm (nach jedem Wechsel der Düse muss dieser Wert aktualisiert werden!)
|-
|Heizbett
|Ja
|-
|Filament Durchmesser
|1,75mm
|-
|Kühlung
|min: 30%; max:70%
|-
|Z-Hop
|0,5mm
|-
|retract speed
|120mm/sec
|-
|retract distance
|5mm
|-
|infill prints after perimeter
|Yes
|-
|start gcode
|<pre>;Sliced at: {day} {date} {time}
G21                    ;metric values
G90                    ;absolute positioning
M82                    ;set extruder to absolute mode
M107                    ;start with the fan off
G28                    ;home all axis
G29                    ;Auto Level
G1 Z0.6 F6000          ;move the Nozzle near the Bed
G92 E0                  ;zero the extruded length
G1 Y0                   
G1 X10 E30 F500        ;printing a Line from right to left
G92 E0                  ;zero the extruded length again
G1 Z2
G1 F6000
M117 Printing...        ;Put printing message on LCD screen
M150 R255 U255 B255 P4  ;Change LED Color to white
;M408                  ;enable filament sensor
</pre>
|-
|end gcode
|<pre>
M104 S0                ;extruder heater off
M140 S0                ;heated bed heater off
G91                    ;relative positioning
G1 E-1 F300            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5            ;move Z up a bit and retract filament even more
G28                    ;home all axis
M84                    ;steppers off
G90                    ;absolute positioning
;M409                  ;disable filament sensor
</pre>
|-
|}
Translation{| class="wikitable"
!Preferences
!Value
|-
|Print volume X
|180mm
|-
|Print volumeY
|170mm
|-
|Print volumeZ
|260mm
|-
|Nozzle size
|0.5 mm (keep in mind to update that value if you change the nozzle!)
|-
|Heated bed
|Yes
|-
|Filament diameter
|1,75mm
|-
|cooling
|min: 30%; max:70%
|-
|Z-hop
|0,5mm
|-
|retract speed
|120mm/sec
|-
|retract distance
|5mm
|-
|infill prints after perimeter
|Yes
|-
|start gcode
|<pre>;Sliced at: {day} {date} {time}
G21                    ;metric values
G90                    ;absolute positioning
M82                    ;set extruder to absolute mode
M107                    ;start with the fan off
G28                    ;home all axis
G29                    ;Auto Level
G1 Z0.6 F6000          ;move the Nozzle near the Bed
G92 E0                  ;zero the extruded length
G1 Y0                   
G1 X10 E30 F500        ;printing a Line from right to left
G92 E0                  ;zero the extruded length again
G1 Z2
G1 F6000
M117 Printing...        ;Put printing message on LCD screen
M150 R255 U255 B255 P4  ;Change LED Color to white
;M408                  ;enable filament sensor
</pre>
|-
|end gcode
|<pre>
M104 S0                ;extruder heater off
M140 S0                ;heated bed heater off
G91                    ;relative positioning
G1 E-1 F300            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5            ;move Z up a bit and retract filament even more
G28                    ;home all axis
M84                    ;steppers off
G90                    ;absolute positioning
;M409                  ;disable filament sensor
</pre>
|-
|}
Preferences Value
Print volume X 180mm
Print volumeY 170mm
Print volumeZ 260mm
Nozzle size 0.5 mm (keep in mind to update that value if you change the nozzle!)
Heated bed Yes
Filament diameter 1,75mm
cooling min: 30%; max:70%
Z-hop 0,5mm
retract speed 120mm/sec
retract distance 5mm
infill prints after perimeter Yes
start gcode
;Sliced at: {day} {date} {time}
G21                     ;metric values
G90                     ;absolute positioning
M82                     ;set extruder to absolute mode
M107                    ;start with the fan off
G28                     ;home all axis
G29                     ;Auto Level
G1 Z0.6 F6000           ;move the Nozzle near the Bed
G92 E0                  ;zero the extruded length
G1 Y0                   
G1 X10 E30 F500         ;printing a Line from right to left
G92 E0                  ;zero the extruded length again
G1 Z2
G1 F6000
M117 Printing...        ;Put printing message on LCD screen
M150 R255 U255 B255 P4  ;Change LED Color to white
;M408                   ;enable filament sensor
end gcode
M104 S0                 ;extruder heater off
M140 S0                 ;heated bed heater off
G91                     ;relative positioning
G1 E-1 F300             ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5            ;move Z up a bit and retract filament even more
G28                     ;home all axis
M84                     ;steppers off
G90                     ;absolute positioning
;M409                   ;disable filament sensor