Difference between revisions of "Slicer Voreinstellungen/en"

From 3Dator Wiki
Jump to: navigation, search
Line 45: Line 45:
 
</gallery>
 
</gallery>
  
<div class="mw-translate-fuzzy">
 
 
{| class="wikitable"
 
{| class="wikitable"
 
!Preferences
 
!Preferences
Line 105: Line 104:
 
M117 Printing...;Put printing message on LCD screen
 
M117 Printing...;Put printing message on LCD screen
 
M150 R255 U255 B255 P4 ;Change LED Color to white
 
M150 R255 U255 B255 P4 ;Change LED Color to white
 +
;M408 ;enable filament sensor
 
</pre>
 
</pre>
 
|-
 
|-
Line 116: Line 116:
 
M84                        ;steppers off
 
M84                        ;steppers off
 
G90                        ;absolute positioning
 
G90                        ;absolute positioning
 +
;M409 ;disable filament sensor
 
</pre>
 
</pre>
 
|-
 
|-
 
|}
 
|}
</div>
 
  
 
==Simplify 3D==
 
==Simplify 3D==

Revision as of 08:42, 30 July 2017

Other languages:
Deutsch • ‎English

Regardless wich slicing software you use, you need to adjust some settings to fit the machine.

Cura 2.x

You can use the newest Cura version for the 3Dator too. The parameters that need to be change are simular to the older cura versions but you'll find them in different spots. We advise you to use the older version.

However we build a profile for Cura 2.5 that can be implemented manually: https://github.com/3Dator/3dator/tree/master/Slicer%20profile/Cura%202.5

Cura 15.04.6

Profile import.jpg

You can find the version 15.04.6 in the list of Cura versions: Cura versions. In Cura you can import the printing settings. You can find our default settings on github:

Link (Download: right click on the button "Raw" and then click "save as")

You can import the profile as seen in the picture to the right "File" > "Open Profile...".

The printer itself needs to be configured by hand.

create a printer


Create custom slicer profile

Preferences Value
Print volume X 180mm
Print volumeY 170mm
Print volumeZ 260mm
Nozzle size 0.5 mm (keep in mind to update that value if you change the nozzle!)
Heated bed Yes
Filament diameter 1,75mm
cooling min: 30%; max:70%
Z-hop 0,5mm
retract speed 120mm/sec
retract distance 5mm
infill prints after perimeter Yes
start gcode
;Sliced at: {day} {date} {time}
M104 S{print_temperature} ;set temperatures
M140 S{print_bed_temperature}
M109 S{print_temperature} ;wait for temperatures
M190 S{print_bed_temperature}
G21  ;metric values
G90  ;absolute positioning
M82  ;set extruder to absolute mode
M107  ;start with the fan off
G28 Z0  ;move Z to min endstops
G28 X0 Y0  ;move X/Y to min endstops
G29  ;Auto Level
G1 Z0.6 F{travel_speed} ;move the Nozzle near the Bed
G92 E0
G1 Y0  ;zero the extruded length
G1 X10 E30 F500  ;printing a Line from right to left
G92 E0  ;zero the extruded length again
G1 Z2
G1 F{travel_speed}
M117 Printing...;Put printing message on LCD screen
M150 R255 U255 B255 P4 ;Change LED Color to white
;M408 ;enable filament sensor
end gcode
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)
G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28                          ;move X/Y to min endstops, so the head is out of the way
M84                         ;steppers off
G90                         ;absolute positioning
;M409 ;disable filament sensor

Simplify 3D

To configure a proffile for your 3Dator select -Other- in the configuration assitent. Then you can insert the following parameter for 3Dator.

Parameter Value
Printer name 3Dator
machine type Cartesion robot
Firmware Reprap
Baud Rate 115200
Build Volume X- Axis 180
Build Volume Y- Axis 170
Build Volume Z- Axis 260
Nozzle diameter 0,5
Number of extruders 1
This printer has a heated bed yes

After that the heated bed can be imported. Download the file at heatbed.stl . You can import the file in the machine tab in the settings menu.

The print settings can be imported in Simplify from a .fff file. Our default profile will give you a good start for your configuration: Link (Download: right click "Raw" -> save as)