Revision history of "Dual Extruder dual nozzles/en"

Jump to: navigation, search

Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

  • (cur | prev) 09:58, 4 April 2017Moritz (talk | contribs). . (3,193 bytes) (-40)
  • (cur | prev) 09:55, 4 April 2017Moritz (talk | contribs). . (3,233 bytes) (+1). . (Die Seite wurde neu angelegt: „Before the print both materials should reach into the nozzles.“)
  • (cur | prev) 09:55, 4 April 2017Moritz (talk | contribs). . (3,232 bytes) (-1). . (Die Seite wurde neu angelegt: „===Start g-code for dual extruder===“)
  • (cur | prev) 09:55, 4 April 2017Moritz (talk | contribs). . (3,233 bytes) (-44). . (Die Seite wurde neu angelegt: „If the material was ouzing out of the nozzle it needs to be primed before it can be used again. There are the following options: * print a prime tower (often d…“)
  • (cur | prev) 09:52, 4 April 2017Moritz (talk | contribs). . (3,277 bytes) (-1). . (Die Seite wurde neu angelegt: „=== prime after toolchange ===“)
  • (cur | prev) 09:51, 4 April 2017Moritz (talk | contribs). . (3,278 bytes) (-78). . (Die Seite wurde neu angelegt: „To prevent ouzing of filament from the unused nozzle folling tips will help you: * use filament that just ouzes less (ABS instead of PLA) * use a ouze shild *…“)
  • (cur | prev) 09:48, 4 April 2017Moritz (talk | contribs). . (3,356 bytes) (-3). . (Die Seite wurde neu angelegt: „=== prevent ouzing ===“)
  • (cur | prev) 09:48, 4 April 2017Moritz (talk | contribs). . (3,359 bytes) (+32). . (Die Seite wurde neu angelegt: „Theoretically the nozzle offset should be 0 mm in the y axis and 20 mm in the x axis. In reality those values will be different from what to expect in theorie.…“)
  • (cur | prev) 09:44, 4 April 2017Moritz (talk | contribs). . (3,327 bytes) (+2). . (Die Seite wurde neu angelegt: „=== Nozzle distance ===“)
  • (cur | prev) 09:43, 4 April 2017Moritz (talk | contribs). . (3,325 bytes) (-32). . (Die Seite wurde neu angelegt: „When printing with two nozzles it is very important that both nozzles are at the same height. This is why both hotends can be adjused in z height when the scre…“)
  • (cur | prev) 09:42, 4 April 2017Moritz (talk | contribs). . (3,357 bytes) (+2). . (Die Seite wurde neu angelegt: „=== both nozzles at the same height ===“)
  • (cur | prev) 09:42, 4 April 2017Moritz (talk | contribs). . (3,355 bytes) (-59). . (Die Seite wurde neu angelegt: „The calibration of the nozzle offsets need to be perfect. Especially the heights are critical. The advantage of a second nozzle consists in less priming and sp…“)
  • (cur | prev) 09:40, 4 April 2017Moritz (talk | contribs). . (3,414 bytes) (+17). . (Die Seite wurde neu angelegt: „This system consists of two extruders as well as two nozzles. The bed leveling won't work with this system because the second system replaces the bed probe. Th…“)
  • (cur | prev) 09:34, 4 April 2017Moritz (talk | contribs). . (3,397 bytes) (+3,397). . (Die Seite wurde neu angelegt: „== Two nozzles, two extruders ==“)