Translations:Slicer Voreinstellungen/13/en

From 3Dator Wiki
Jump to: navigation, search
Preferences Value
Print volume X 180mm
Print volumeY 170mm
Print volumeZ 260mm
Nozzle size 0.5 mm (keep in mind to update that value if you change the nozzle!)
Heated bed Yes
Filament diameter 1,75mm
cooling min: 30%; max:70%
Z-hop 0,5mm
retract speed 120mm/sec
retract distance 5mm
infill prints after perimeter Yes
start gcode
;Sliced at: {day} {date} {time}
G21                     ;metric values
G90                     ;absolute positioning
M82                     ;set extruder to absolute mode
M107                    ;start with the fan off
G28                     ;home all axis
G29                     ;Auto Level
G1 Z0.6 F6000           ;move the Nozzle near the Bed
G92 E0                  ;zero the extruded length
G1 Y0                   
G1 X10 E30 F500         ;printing a Line from right to left
G92 E0                  ;zero the extruded length again
G1 Z2
G1 F6000
M117 Printing...        ;Put printing message on LCD screen
M150 R255 U255 B255 P4  ;Change LED Color to white
;M408                   ;enable filament sensor
end gcode
M104 S0                 ;extruder heater off
M140 S0                 ;heated bed heater off
G91                     ;relative positioning
G1 E-1 F300             ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5            ;move Z up a bit and retract filament even more
G28                     ;home all axis
M84                     ;steppers off
G90                     ;absolute positioning
;M409                   ;disable filament sensor